Daylight Visibility in a Compact Format
The 2.58 × 1.6 m screen needed enough brightness and pixel density to keep video and advertising content legible in high ambient light without relying on the scale of a large billboard.
A 2.58 × 1.6 m Commercial Screen Designed for Daylight Visibility, Thermal Management, and Outdoor Reliability
The project needed a compact outdoor LED screen that could present changing commercial content above an existing fuel-price structure. The display had to remain visible in bright conditions while fitting the proportions and visual hierarchy of the pylon.
Unlike a large roadside billboard, this screen operates within a relatively small 2.58 × 1.6 m format. That places greater emphasis on pixel density, contrast, and content legibility. At the same time, the outdoor enclosure must manage heat, environmental exposure, and long-term dimensional stability.
UHLED selected a P5 full-aluminum outdoor platform to balance visual definition, daylight brightness, and the material advantages of an aluminum cabinet and module structure.
PROJECT PRIORITIES
•Maintain commercial content visibility under high ambient light.
•Fit a 2.58 × 1.6 m screen into an existing roadside signage structure.
•Use P5 resolution to balance viewing distance and content definition.
•Manage heat through an aluminum-based outdoor architecture.
•Prepare a project configuration appropriate for outdoor environmental exposure.
|
Project Location |
الولايات المتحدة الأمريكية |
|
التطبيق |
Outdoor commercial / roadside signage |
|
Display Type |
Full-aluminum outdoor fixed LED display |
|
بيكسل بيتش |
P5 |
|
Screen Dimensions |
2.58 × 1.6 m |
|
Screen Area |
Approximately 4.13 m² |
|
كثافة البيكسل |
40,000 pixels/m² |
|
سطوع |
More than 6000 cd/m² |
|
LED Type |
High-efficiency SMD2727, as stated on the source page |
|
Project Refresh Rate |
Project specific — confirm before publishing |
|
Project Maintenance |
Custom — confirm front/rear access before publishing |
|
Visible Installation |
LED screen mounted above a fuel-price pylon |
|
Product-Series Cabinet Reference |
960 × 960 mm die-cast aluminum cabinet; actual project layout requires confirmation |
|
Product-Series Protection |
IP66, as stated for the full-aluminum outdoor series |

The installation needed to deliver visible content, manage outdoor thermal and environmental stress, and integrate with the project structure as a coordinated system.
The 2.58 × 1.6 m screen needed enough brightness and pixel density to keep video and advertising content legible in high ambient light without relying on the scale of a large billboard.
Outdoor electronics face solar heat, temperature changes, moisture, dust, and potential corrosion. The display architecture needed to support heat dissipation and environmental protection around sensitive LEDs, driving ICs, power, and signal components.
The screen had to fit an established pylon format, maintain a low-profile appearance, and coordinate cabinet layout, mounting, power, signal, access, packing, and technical support without assuming a standard configuration would fit automatically.
UHLED matched P5 visual performance, full-aluminum construction, and project planning to the operating conditions of the USA commercial-signage installation.
P5 pixel pitch, a density of 40,000 pixels/m², high-efficiency SMD2727 LEDs, and brightness above 6000 cd/m² provide a defined visual base for commercial content in high-ambient-light outdoor conditions.
The product series uses die-cast aluminum modules and cabinets to conduct heat away from LEDs and driving components while resisting the warping associated with plastic module bases. Series specifications cite IP66 protection and ≤0.1 mm flatness; the exact delivered project configuration should be confirmed against its production record.

Screen dimensions, cabinet or module layout, mounting, power, signal, maintenance access, packing, and remote engineering support were treated as one project workflow. Because 2.58 × 1.6 m does not directly resolve into 960 × 960 mm cabinets, the final layout must follow the approved project drawing rather than a generic cabinet count.
The completed installation adds a programmable visual area above the existing fuel-price display, allowing the sign structure to carry video and changing commercial messages in addition to fixed price information.

Brightness above 6000 cd/m² supports content visibility in demanding ambient-light conditions, while the P5 configuration provides 40,000 pixels per square meter across the compact screen area.
The 2.58 × 1.6 m format creates a focused digital zone without turning the pylon into a large billboard, helping digital content remain integrated with the surrounding signage.
The full-aluminum product architecture provides a foundation for heat dissipation, structural flatness, and environmental sealing. Final maintenance access and delivered cabinet layout remain project-specific and should be documented in the installation record.
Tell us your venue, screen size, application, and timeline. UHLED will help you plan a suitable LED display solution.
Simple details are enough to get started.
Required fields are marked with an asterisk.
